To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
If you care about keeping a clean, factory look when you’re not towing, this setup fits the bill. The invisible design leaves no obtrusive crossbar or protruding brackets, and the drawbar arms stay on your tow bar instead of the vehicle. Snap-in high-density polyethylene covers keep dirt and debris out of the receivers, so the tabs slide in and out smoothly every time.
Connecting the tow bar is simple thanks to the twist-lock design. Just insert the tab into the base plate receiver, twist to lock it in place, and drop in the pull pin for extra security. When you’re done towing, tug the pin, give it a twist, and pull it free—it’s quick and clean. The brackets are spaced 21" apart with a bracket height of 15", giving you consistent geometry for setup.
This base plate bolts directly to your vehicle’s chassis with no welding required. The sturdy steel design spreads towing force evenly to reduce stress on suspension components. Every piece bolts up solidly with the included hardware for dependable strength mile after mile.
Already have a tow bar setup you like? You can keep it. This base plate works with Demco, etrailer, and Blue Ox tow bars without an adapter. If you’re running Roadmaster, just use the correct adapter—e98983, e98984, e98979, or e98981 (sold separately). An included electrical bracket lets you easily mount a round electrical connector plug so your wiring stays organized and ready to go.
This kit is designed for an easy bolt-on install using basic tools—no welding required. It comes with all necessary hardware and clear instructions to guide you through the process. Once bolted up, it’s ready for long trips and everyday towing alike without compromising the front-end looks when disconnected.
Ratings & Reviews
Works great, easy installation
Like the look of the base plate ( hence invisible).
Excellent quality workmanship. Installation instructions were clear and the process was straightforward. Very pleased with the end result.
Amy was very knowledgeable about your products and Absolutely Professional as well Prompt with obtaining Correct information. Very friendly and helpful. Will Surely use your products and services when needed. Thank you
Very good quality. Great instructions and install video.
easy to find on your web site, quick delivery, everything needed for a quick and secure installation. The instructions were easy to follow and all parts were included and fit perfectly.
Fit my 2018 Colorado 2WD manual perfectly. I disconnect the drive shaft and hose-clamp it to the gas tank cross-member when I flat-tow it. works perfectly
This is a great base plate, it really looks good and integrates well with the front of the jeep.
Easy installation on my F-150. Videos on website are very helpful.
They were easy to install and came with good instructions and pictures. This is the second vehicle I have installed this product on and etrailer is my go to.
Relatively easy install. Double check the skid plate templates. I had to change mine significantly, not just holes but slots from the top all the way to the bottom of the towbar. In the end, they look great they install well. Very nice system.
Heavy duty bracket. The included bracket for the electrical is also heavy duty.
Mounted on a 2025 Bronco with modular bumper. I did have to do a little additional cutting on the bumper to make it fit.
Easy installation if you watch the videos on the etrailer website.
I like the fact that this base plate is hidden behind the air dam below the bumper.
Install of the baseplate itself was not difficult and went smooth. The templates to cut out the holes in my plastic shroud were not accurate. It took some additional trimming to get right and I found that a bit frustrating.
I have installed three base plates on my vehicles. All have been purchased from trailer. They have all been rather easy to install just a matter of taking the time it takes. On this last one mounted on my 2024 Ford Maverick I recommend adding to the instructions an easier way to unplug the light plug from the front facia. I think it is much easier if one turns the wheel full left and unplug the socket before pulling the facia. Easier than current instructions that say be careful when pulling the facia since the plug needs to be undone. I was able to do the whole thing by myself this way and not needed someone else to hold the facia while disconnecting the plug.
Nice setup. Instructions were little off for my application (2026 with shutters) Shutters had to be removed to install correctly. Instructions did not cover this. Everything fit as it should. Final product very satisfied.
The baseplate fit great, fairly simple and install. The instructions from the front valance cutting were off a bit. I had to take it on and off a couple of times and trim to get it to fit. Overall the quality is great.
2025 Ford Mavrick AWD Hybrid. I have installed 2 base plate kits on Honda CRVs.
Piece of cake. Remove front cowling..install base plate..done. Not so on my 2 day old Mavrick. 1 add a spacer to move kit away from shutters...adding washers is super poor planning on manufacturing's part..2 you don't have to go up & over in the middle now 70% of the condenser air flow is blocked by welded steel..could have been much better. 3 provide a mounting ring or hook...wrapping a safety cable around sheet metal components is silly Engineering.
If you follow the easy to read and understand instructions, it’s a breeze to install. Beautiful!!! Highly recommend rhese baseplates
Installation on a 2018 Jeep JL Unlimited Sahara went well, no surprises. Attaching the base plate to chassis safety cables required some ingenuity as the instructions were useless in this installation. Etrailer should post some actual installation photos vs. a poor generic diagram.
Very easy to install and I love the finished look. However I had to cut a couple of relief points in the rock guard in order to get the back two screws into place. Without these the rock guard would bind against these points on the base plate and not allow the rock guard to travel back far enough to reattached the screws. I have a 2025 Jeep Wrangler Sahara.
Came very well packaged, looked great very well made and heavy duty.
Instructions could have been better.
Template for air dam cutout just a rough starting point you will need to do more trimming for proper fit. Overall very happy looks great and very solid.
I've bought from e-trailer several times and I'm always happy with my purchase. The base plate and tow bar are of excellent quality and a good price. Installation was as not too bad; I watched the installation video for my truck even though it was for a different base plate. It gave me enough information to get the job done.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.